With the OekoTube-Masonry, it is now possible to install the separator in the masonry chimney indoors.
In July, the OekoTube-Masonry received DIBt approval (Z-7.4-3451) and is approved for up to 100 kW and for multiple use. This enables the simultaneous operation of several fireplaces on one chimney. This means, for example, that existing tiled stoves and fireplace inserts that cannot be replaced can be retrofitted with the OekoTube-Masonry and continue to be operated in compliance with the law. Of course, automatic fireplaces such as pellet, wood chip or lump wood boilers can also be equipped with the OekoTube-Masonry in order to meet the requirements of the 1st BImSchV.
Due to the preferred installation in the attic, the particle separator is easily accessible for installation and cleaning by the chimney sweep. The chimney is opened at one point and an installation frame is walled in. The separator can then be easily attached to this installation frame. For cleaning, the chimney sweep can simply remove the particle separator from the chimney and carry out the cleaning as usual.
The electrostatic fine dust collector OekoTube-Inside is approved for wood firing systems up to 100 kW and is installed in the boiler room after the wood boiler.
The OekoTube-Inside is optionally available with a semi-automatic or fully automatic cleaning system. For boiler outputs above 50 kW, this significantly reduces the cleaning effort is significantly reduced. With the appropriate connection set, the fine dust separator can be conveniently connected to any boiler.
The electrostatic fine dust separator OekoTube-Outside is approved for single room furnaces up to 50 kW and is mounted on the chimney mouth.
The OekoTube-Outside significantly reduces fine dust emissions and thus contributes to improving local air quality.
Both newly constructed and existing fireplaces can be equipped with the OekoTube-Outside and thus be operated in accordance with local emission regulations.
The OekoRona is an electrostatic precipitator that significantly reduces fine dust emissions from wood firing systems.
The OekoRona is suitable for all types of automatic wood firing systems such as log, wood chip or pellet heating systems with an output of up to
up to 500kW. The OekoRona is installed in the boiler room directly after the boiler and can be used both for new installations and for retrofitting. Automatic cleaning enables fully automatic operation
The OekoRona M is an electrostatic precipitator that significantly reduces fine dust emissions from automatic wood-fired boilers with
with outputs between 300 kW and 3 MW. The separator has a modular design and can be installed in new as well as in existing
existing systems. Mechanical cleaning enables fully automatic operation of the separator and reduces maintenance to a minimum.
OekoSolve develops electrostatic precipitators (ESP) for woody biomass heaters up to 3 MW with an integrated electrostatic precipitator up to 10 MW. The particulate filters, which are based on the electrostatic principle, ensure the compliance with the statutory regulations with regard to the maximum permissible particulate matter load for wood combustion systems. The fine dust filters can be used in any wood stoves for pellets, wood chips and wood logs.
Plan your visit to the trade fair!
